note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: RC0039F doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1/ sum _ _ _ _ _ _ screening 2 / __ = not screened tx = tx level txv = txv level s = s level package type _ _ = axial leaded sms = surface mount square tab v oltage/family 60uf = 6,000v 70uf = 7,000v 80uf = 8,000v 90uf = 9,000v 100uf = 10,000v sum60uf thru sum100uf and sum60ufsms thru sum100ufsms 500 ma ultra fast recovery rectifier 6,000 thru 10,000 volts 70 nsec features: ? piv to 10,000 volts ? hermetically sealed axial and square tab surface mount package ? ultra fast recovery 70 nsec maximum 4/ ? void free construction ? metallurgically bonded ? 175c maximum operating temperature ? tx, txv, and s-level screening available 2/ ? also available in fast versions, consult factory maximum ratings 3 / 6 / rating symbol value unit peak inverse voltage sum60uf and sum60ufsms sum70uf and sum70ufsms sum80uf and sum80ufsms sum90uf and sum90ufsms sum100uf and sum100ufsms piv 6000 7000 8000 9000 10000 volts average rectified current axial @ l = 3/8? t l 75c t l 115c surface mount t ec 125c t ec 140c i o1 i o2 500 250 ma surge current (1 cycle) i fsm 30 amps operating & stor age temperature 5 / t j and t stg -65 to +175 c typical thermal impedance junction to lead for axial, l =.375" junction to end tab for surface mount r jl r je 15 5 c/w notes: 1/ for ordering information, price, operating curves, and availability- contact factory. 2/ screening based on mil-prf-19500. sc reening flows available on request. 3/ unless otherwise specified, all el ectrical characteristics @25oc. 4/ i f = 500ma, i r = 1a, i rr = 250ma, t a = 25c 5/ maximum lead/end temperature for soldering is 250c, 3/8? from the case for 5 sec. maximum. 6/ operating and testing over 10,000 v/inch may re quire encapsulation or i mmersion in suitable dielectric material. axial leaded sms
note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: RC0039F doc electrical characteristics 3 / 6 / characteristics symbol value unit maximum forward voltage (pulsed) i f = 500 ma v f 15.5 vdc maximum reverse leakage current (v r = rated) (t a = +25c) (t a =+100c) i r1 i r2 1.0 30 a a maximum junction capacitance v r = 100 vdc, f = 1mhz, t a = 25c c j 8 pf maximum reverse recovery time i f = 500ma, i r = 1a, i rr = 250ma, t a = 25c t rr 70 ns package outlines : dimensions (inches) dimensions (inches) dim. minimum maximum dim. minimum maximum a .115 .165 a .170 .180 b --- .310 b .330 .380 c .047 .053 c .020 .030 d 1.00 --- d .002 --- axial sms solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com sum60uf thru sum100uf and sum60ufsms thru sum100ufsms
|
